CR-410C

The large aperture CR-410 chromameter with specially modified firmware and purpose designed sample holder is used to provide colour measurements of coffee at all stages of the production process using industry standard measurements.

Ø 50mm measurement aperture
Sample holder jig
SCAA index data for coffee products
Portable

Get in Touch

Customised CR-410 tristimulus colorimeter specifically for measuring the colour and quality of coffee throughout production

The CR-410C handheld coffee colorimeter is specifically designed to measure the colour of whole green beans, roasted beans, and roasted coffee using industry standard measurements.

The CR-410C is a tristimulus colorimeter that measures colour using filters with a close match to the spectral sensitivity function of the human eye. Using this technology, operators can achieve traceable measurement data for colour and colour difference that correlates with human perception.

The device firmware contains the Speciality Coffee Association of Americas (SCAA) Speciality coffee index to quickly, simply and repeatably calculate the colour difference from a standard, roast level (light, medium, medium dark, dark) and pass/fail tolerances.

Utilising this cost effective and portable setup, the operator can accurately measure the colour of coffee in various forms: whole green beans, roasted beans, roasted and lyophilized (Freeze Dried).

Features

CR-410C
Not Available	Not Available

Model	CR-410 Head
Illuminating/viewing system	Wide-area illumination:0° viewing angle; specular component included
Detector	Silicon photocells (6)
Display range	Y: 0.01% to 160.00% (reflectance)
Light source	Pulsed xenon lamp
Measurement time	1 sec.
Minimum measurement interval	3 sec.
Battery performance	Approx. 800 measurements (when using batteries under Konica Minolta’s testing conditions)
Measurement/illumination area	Ø 50 mm/ Ø 53 mm
Repeatability	Within ΔE*ab 0.07 standard deviation (when the white calibration plate is measured 30 times at intervals of 10 seconds)
Inter-instrument agreement	ΔE*ab: within 0.8 Average of 12 BCRA Series II colours
Observer condition	CIE: 2° Standard Observer
Illuminant condition	CIE: C, D65
Tolerance judgment*	Colour difference tolerance (box tolerance and elliptical tolerance)
Colour space/colorimetric data*	XYZ, Yxy, Lab, Hunter Lab, LC*h, Munsell (Illuminant C only), CMC (l:c), CIE1994, Lab99, LCh99, CIE2000, CIE WI/Tw (Illuminant D65 only), WI ASTM E313 (Illuminant C only), YI ASTM D1925 (Illuminant C only), YI ASTM E313 (Illuminant C only), User index (Up to 6 can be registered from computer), SCAA scale
*Languages (Display)**	LCD: English (default), German, French, Italian, Spanish, Japanese
Storable data sets	1,000 (Measuring head and data processor save different data)
Colour-difference target colours	100
Calibration channels*	20 channels (ch00: White calibration; ch01 to ch19: User calibration)
Display*	Chroma values; colour difference values; PASS/WARN/FAIL display
Interface / Baud rate*	RS-232 compliant (for data processor/PC) * Baud rate: 4,800, 9,600, 19,200 (bps); Set at 9600 when shipped from factory
Power source	Four AAA size alkaline or Ni-MH batteries AC Adapter AC-A305 AC100 – 240 V 50/60Hz
Dimensions (W × H × D)	102 × 244 × 63 mm
Weight	Approximately 570 g (including 4 AAA size batteries and not including RS-232C cable)
Operating temperature/humidity range	0 – 40°C, relative humidity 85% or less with no condensation
Storage temperature/humidity range	-20 – 40°C, relative humidity 85% or less with no condensation
Other	LCD backlight ON/OFF function (When on, backlight stays ON for 30 seconds after last key or measurement operation)

The “*” mark indicates functions available only when the Data Processor is connected or when the required settings have been made.

NB:

Specifications are subject to change without prior notice.
Company names and product names herein are trademarks or registered trademarks of their respective companies.
If you have any questions about specifications, please contact your Konica Minolta representative.

NB:

Specifications are subject to change without prior notice.
Company names and product names herein are trademarks or registered trademarks of their respective companies.
If you have any questions about specifications, please contact your Konica Minolta representative.

Features

Ø 50mm measuring aperture: averages a large area for repeatable results.

Built- in backlit LCD display: colour measurement, colour difference and tolerance data are plainly displayed and visible even in dark conditions.

Custom jig and measuring cups: purpose designed instrument holder guides one or 3 samples into position under the aperture to ensure repeatable measurements and best practice sample presentation.

Battery or AC Power: The CR-410C can be powered either by AAA batteries or AC power in order to minimise downtime.

Enhanced reporting and storage via PC: connect the system to optional SpectraMagic NX software to present data in standard or user generated templates.

Powder Sample Holder with Three Cup Holder

This sample holder enables the instrument to be held in position during powder sample measurement. Powdery samples are placed in the cups that are held in a sliding tray with three cups. This holder is best suited for fine powders although granular materials can be used in it as well. Enables the quick, easy, and precise measurement of powder with a CR-410.

Item comes with three cups and is not recommended for liquids.

Item Order Code: B027057

Cup for Powder Sample Holder

Spare cups for B027057 and B027058

Item Order Code

Granular Attachment CR-A50

For measurements of powders, pastes, grains or other small sized granular material. The low reflectance glass plate protects the sample surface against disorientation and prevents specimen material to enter the instrument. The set includes one retaining ring each to adjust the measuring area accordingly to either CR-400 or CR-410.

Item Order Code: 1829-751

Glass Plate for CR-A51 (for CR-A50)

Replacement low reflectance glass plate for CR-A50 Granular Attachment.

Item Order Code: 1829-752

Retaining Ring Set CR-A52

Replacement ring set for CR-A50 Granular Attachment. The set consist of one ring each for CR-400 and CR-410.

Item Order Code: 1829-753

Light Protection Tube with Glass Protection CR-A33e (only for CR-410)

Light projection tube for measurement of pasty, wet or moist samples. The protection glass plate prevents specimen from entering the instrument.

Item Order Code: 1849-735

Cell Holder CR-A501 (only for CR-410)

For measurements of powders, grains and granular materials in combination with the Glass Cell CR-A504. The measuring head is set to up-side down position and the Cell Holder CR-A501 precisely fixes the position of the Glass Cell CR-502.

Item Order Code: 9970-219

Glass Cell CR-A502 (only for CR-410)

Glass Cell made of optical glass for measurements of powders, pastes, grains and small granular materials. Diameter of the cell 60 mm. For precise positioning the Cell Holder CR-A501 is recommended.

Item Order Code: 9970-220

Vertical Stand USD CM-A516

The CM-A516 Vertical allows aligning the instrument in Up-Side-Down position and secures that the instrument cannot get out of balance by using the Cell-Holder CR-A503 for CR-400 and CR-A501 for CR-410.

Item Order Code: B027154

Hard Case CR-A103

For comfortable hand carrying and storage of measuring head, data processor and accessories.

Item Order Code: 1878-600

Data Cable CR-A102 RS232c

Connection cable between measuring head or data processor and PC. For PC terminals with 9 pin SUB-D connecter. Length of the cable 2 m.

Item Order Code: 1878-704

Request a Quote

CR-410C

The large aperture CR-410 chromameter with specially modified firmware and purpose designed sample holder is used to provide colour measurements of coffee at all stages of the production process using industry standard measurements.

Customised CR-410 tristimulus colorimeter specifically for measuring the colour and quality of coffee throughout production

Features

Features

Related