CM-25d

Enkel diafragma versie van Konica Minolta Sensing's top draagbare spectrofotometer met dezelfde eenvoudige, moderne gebruikersinterface en ingebouwde sample viewer.

Draagbare Spectrofotometer
Golflengtebereik 360-740 nm
d:8° bol geometrie
Gelijktijdige SCI / SCE meting
Oplaadbare lithium-ion batterij

Neem contact op

Deel:

Draagbare spectrofotometer met gemiddelde opening

d:8° meetinstrument met 8mm meetopening en horizontale uitlijning, ideaal voor vlakke monsters of metingen in nauwe ruimtes.

De CM-25d is de directe opvolger van de CM-2500d en meet kleurgegevens voor specular component included (SCI) en specular component excluded (SCE) in één enkele meting.

De CM-25d heeft dezelfde gebruiksvriendelijke interface als de CM-26dG met verbeterde sample viewer, groot kleurenscherm, eenvoudig ambidexter bedieningspaneel, en lithium-ion batterij (verwijderbaar) met de optie om extra batterijen op te laden in een externe lader.

Model		CM-25d
Colour	Illumination/ viewing system	di:8°, de:8° (complies to DIN5033-7, JIS Z 8722c, ISO7724/1, CIE No.15)
	Applicable standards for illumination/viewing system	Conforms to ISO 7724/1, CIE No.15 (2004), ASTM E 1164 (SCI), DIN5033 Teil7, JIS Z 8722 Condition "c" standard
	Integrating sphere	Ø54mm
	Detector	Dual 32-element silicon photodiode array
	Spectral separation device	planar diffraction grating
	Wavelength range	400-700nm
	Wavelength pitch	10 nm
	Half bandwidth	approx. 10 nm
	Measurement range	0~175%
	Measurement range	Resolution: 0.01%
	Light source	Pulsed Xenon lamp
	Light source life time	more than 1 Million
	Illumination area	MAV: Ø12.0mm
	Illumination area	MAV: Ø12.0mm
	Measurement area	MAV：Ø8.0 mm
	Measurement area	MAV：Ø8.0 mm
	Measurement time	approx. 0.7sec (SCI or SCE)
	Min. measurement interval	approx. 1.5sec (SCI or SCE)
	Repeatability	Standard deviation within ΔE*ab 0.04
	IIA	within ΔE*ab 0.20 (MAV/SCI) Average for 12 BCRA Series II color tiles compared to values measured with master body.
	UV control	UV0
	Observer	2°, 10°
	Illuminants	A,C,D50,D65,F2,F6,F7,F8,F10,F11,F12,ID50,ID65,LED-B1,LED-B2,LED-B3,LED-B4,LED-B5,LED-BH1,LED-RGB1,LED-V1,LED-V2,User-defined illuminant *2 (Max. 3 types) (Simultaneous evaluation with two light sources possible)
	Displayed data	Spectral values/graph, Colorimetric values/graph, Color-difference values, Pass/Fail Judgement, Pseudocolor, Graphical Workflows (Job)
	Colorimetric data	Lab, LC*h°, HunterLab, Yxy, XYZ, and Color Differences in these color spaces, Munsell
	Indexes	MI, WI (ASTM E313-73); YI (ASTM E313-73, ASTM D1925); ISO brightness (ISO2470); WI/Tint (CIE); Tristimulus Strength; Opacity; Grey scale (ISO 105-A05); 8° gloss value; K/S strength (Apparent (ΔEab), Maximum absorption, Total wavelength); Staining degree (ISO 105-A04); Average Reflectance; User index³; Blackness (My) (ISO18314-3/DIN55979) ⁴; Jetness (Mc) (ISO18314-3) ⁴; Undertone (dM) (ISO18314-3) *⁴
	Colour difference formulas	ΔE*ab (CIE1976), ΔE94 (CIE1994), ΔE00 (CIE2000), ΔECMC (l:c), HunterΔE, ΔE99o (DIN6172)
	Data memory	Targets: 1.000
	Data memory	Sample: 5.000
	Battery performance	approx. 3.000 measurement/charge
	Battery performance	approx.1.000 measurement/charge when using Bluetooth™ communication
	Display	2.7 inch TFT color LCD
	Languages	English, German, French, Italian, Spanish, Portuguese, Russian, Turkish, Polish, Chinese (Simplified), Japanese
	Interfacing	USB 2.0; WLAN (IEEE 802.11 b/g/n) /Bluetooth (Ver.4.1, SPP-compatible.)56
Power	AC power	Dedicated AC adapter (with lithium-ion battery installed)
	supply Battery	Dedicated lithium-ion battery (removable)
	USB charging	USB bus power (with lithium-ion battery installed)
	Charging time	approx. 6 hours at complete discharge
	Operation temperature/	5-40°C / rH 80% or less (at 35°C) with no condensation
	humidity range	5-40°C / rH 80% or less (at 35°C) with no condensation
	Storage temperature/	0-45°C / rH 80% or less (at 35°C) with no condensation
	humidity range	0-45°C / rH 80% or less (at 35°C) with no condensation
	Size [mm]	81.2×93.3×228.6
	Weight [g]	Approx. 620 g (Lithium-ion battery

*1 Firmware version 1.10 or later and optional Color Data Software SpectraMagic NX2 Pro is required to use UV Adjusted setting.

*2 Optional Color Data Software SpectraMagic NX2 is required for setting user-configured illuminants. When selecting an LED light source as LED-B1 for the illuminant, if SpectraMagic NX2 is in use, it must be version 1.5 or later, and if Spectrophotometer Configuration Tool CM-CT1 is in use, it must be version 1.51 or later.

*3 CM-CT1 (Ver. 1.4 or later) and a valid SpectraMagic NX2 license are required for setting user indices.

*4 Blackness (My) (ISO 18314-3/DIN 55979), Jetness (Mc) (ISO 18314-3), and Undertone (dM) (ISO 18314-3) shall only be applied when measurements are performed under SCE conditions.

*5 Requires optional accessory WLAN/Bluetooth module (CM-A300).

*6 WLAN security supports WPA2-PSK (WPA2-Personal) and WPA-PSK (WPA-Personal) for the AdHoc method, and WPA3-PSK (WPA3-Personal), WPA2-PSK (WPA2-Personal) and WPA-PSK (WPA-Personal) for the Infrastructure method.

NB:

Specificaties kunnen zonder voorafgaande kennisgeving worden gewijzigd.
Bedrijfsnamen en productnamen hierin zijn handelsmerken of gedeponeerde handelsmerken van hun respectievelijke bedrijven.
Neem contact op met uw Konica Minolta-vertegenwoordiger als u vragen hebt over de specificaties.

Eigenschappen

A cost effective portable for customers who do not require the unmatched accuracy and close tolerance performance of the CM-26d. The CM-25d uses the same firmware and user interface to deliver a simple, modern colour measurement experience.

Built-in Display: greatly improved usability and reduced risk of operator errors, measurement data is shown graphically and numerically.

Illuminated Sample Viewer: seamlessly align the instrument with the measurement area and preview the sample to ensure that the correct area is measured.

Updated design: lightweight instrument designed for ambidextrous operation via intuitive control pad.

Rechargeable Battery: lithium-ion battery (removable) charged via USB bus power can be backed up by additional batteries and external charger (optional).

Compatible with CM-CT1 configuration tool: allowing configuration of multiple devices via config file, device administrator to prevent operator settings and remote support/training via screensharing.

CM-26dG, CM-26d en CM-25d Brochure

Draagbare spectrofotometer met eenvoudige gebruikersvriendelijke interface beschikbaar als instrumenten met nauwe tolerantie of als vereenvoudigd model met één opening.

Download

SpectraMagic™ NX2 software voor kleurgegevens

SpectraMagic™NX2 is Konica Minolta's software voor digitale kleurgegevens, waarmee operators kleur kunnen meten, vergelijken, opslaan, analyseren en communiceren.

De software is voorzien van een QC-sjabloonsysteem dat helpt het meet- en rapportageproces te beheersen en de kans op operatorfouten te minimaliseren.

De gegevens worden gepresenteerd in een eenvoudig aanpasbaar sjabloonsysteem, zodat de nadruk ligt op bruikbare en bruikbare gegevens en rapportage.

Meer leren