CM-700d / CM-600d

Vertical aligned portable spectrophotometer with small and medium measurement aperture and a small footprint, perfect for stable contact when measuring the colour of small or curved surfaces.

Vertically aligned portable spectrophotometer
Wavelength range 400-700 nm
d:8° Sphere Geometry
Simultaneous SCI / SCE measurement
2 Apertures SAV / MAV (CM-700d only)

Ideal solution for precise colour measurement of shaped and curved samples

The Konica Minolta CM-700d and CM-600d are vertically aligned portable sphere type spectrophotometers. For each measurement, data for specular component included (SCI) and excluded (SCE) are taken simultaneously to analyse the impact of surface conditions on measured colour.

The simple colour display and control pad means that the instrument is easy to integrate into processes and minimises the risk of operator error. Easy and intuitive user guidance in 6 languages guarantees maximum efficiency for daily colour quality control in the lab or the production line.

The CM-700d offers an additional user selectable 3mm measuring aperture to further improve performance on small samples.

Features

CM-700d / CM-600d
Not Available	Not Available

Model	CM-700d	CM-600d
Illumination/viewing system	di:8°, de:8° (diffused illumination, 8-degree viewing angle), d:8° (diffuse illumination/8° viewing angle), selectable SCI (di:8° specular component included) and/or SCE (de:8° specular component excluded) measurement. Conforms to CIE No. 15, ISO 7724/1, ASTM E-1164, DIN 5033 Teil 7, and JIS Z8722 Condition C standards.
Size of integrating sphere	Ø 40 mm
Detector	Silicon photodiode array (dual 36-element)
Spectral separation device	Diffraction grating
Wavelength range	400 nm to 700 nm
Wavelength pitch	10 nm
Half bandwidth	Approx. 10 nm
Light source	Pulsed xenon lamp (with UV cut filter)
Measurement time	Approx. 1 second
Battery performance	With alkaline dry batteries: Approx. 2000 measurements With nickel-metal-hydride rechargeable batteries (2300 mAh): Approx. 2000 measurements with full charge * Measured at 10-second intervals at 23°C; measurement fixed at SCI or SCE
Measurement/illumination area	MAV: Ø 8 mm / Ø 11 mm SAV: Ø 3 mm / Ø 6 mm * Changeable by replacing target mask and selecting lens position	MAV: Ø 8 mm / Ø11 mm only
Repeatability	Spectral reflectance: Standard deviation within 0.1%, Chromaticity value: Standard deviation within ΔEab 0.04 When a white calibration plate is measured 30 times at 10-second intervals after white calibration
Inter-instrument agreement	Within ΔEab 0.2 (MAV/SCI) Based on 12 BCRA Series II color tiles compared to values measured with a master body at 23°C
Display	2.36-inch TFT color LCD
Interfaces	USB1.1; Bluetooth® standard version 1.2*
Observer condition	CIE: 2° and 10° standard observer
Illuminant condition	CIE: A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (simultaneous evaluation is possible using two light sources)
Displayed data	Spectral values/graph, colorimetric values, color difference values/graph, PASS/FAIL result, color patch, color assessment
Color spaces	Lab, LC*h, Hunter Lab, Yxy, XYZ, Munsell, and color difference in these spaces (except for Munsell)
Colorimetric data	MI, WI (ASTM E313), YI (ASTM E313-73/ASTM D1925), ISO Brightness, 8° gloss value
Color difference formulas	ΔEab (CIE1976), ΔE94 (CIE1994), ΔE00 (CIE 2000), CMC (l:c)
Storable data sets	Measurement data: 4000 sets/Target color difference data: 1000 sets
Power	4 AA-size alkaline dry batteries or nickel-metal-hydride rechargeable batteries; , Special AC adapter
Dimensions (W x H x D)	73 x 211.5 x 107 mm
Weight	Approx. 550 g (without white calibration cap and batteries)
Operating temperature/ humidity range	5 to 35°C; relative humidity 80% or less with no condensation
Storage temperature/ humidity range	0 to 45°C; relative humidity 80% or less with no condensation

Applicable Bluetooth® profile: Serial Port Profile：Output: Bluetooth® Power Class 1 The communication distance may vary depending on the obstacles and radio wave conditions between the devices. Successful wireless communication is not guaranteed with all Bluetooth®-ready equipment. Bluetooth® is a registered trademark of Bluetooth SIG, Inc. and is used under license agreement.

NB:

Specifications are subject to change without prior notice.
Company names and product names herein are trademarks or registered trademarks of their respective companies.
If you have any questions about specifications, please contact your Konica Minolta representative.

Features

Built-in colour display: colour measurement data is displayed graphically and numerically along with tolerances and simplified pass / warn / fail judgements of samples against the relevant target colour data.

Wireless communication: the device offers a wireless Bluetooth® link to a PC or printer. This feature brings a new dimension of freedom and mobility to production colour measurement operations, eliminating the need for tangled wires and connecting cables. The Bluetooth® communication of the new devices allows for bi-directional wireless communication up to a distance of 100 metres. In stationary mode, the wired connection via a USB port can also be used.

Vertical alignment: the small footprint of the instrument is ideal for accurately and securely placing the measurement aperture on small and curved solid samples

Selection of versatile aperture plates: dependent on the sample, the device is supplied with different aperture plates with and without a foot to improve the contact of the device to flat samples or with optical glass apertures for powdered, damp or soft samples.

Universal Target Mask for CM-700d (No Wireless) Series CM-A523

Small footprint and enhanced standing stability
Target finder without offset
Integrated ring groove for Retaining Ring and Cell Holder to measure powder or liquids with tube cells
Interior tube cell holder for powdery and pasty materials using aperture with glass plate
Triangular groove to reproducibly position long objects with a radius
Alternative positioning fixture

Item Order Code: B027256

Zero Calibration Box CM-A182

For perfect zero calibration. The black cavity tube prevents ambient light from entering the sensor during the calibration.

Item Order Code: A0E8-705

Glass protected Target Masks Ø 8 mm CM-A183

Target mask with glass protection plate to measure soft or wet samples. The protection glass plate prevents specimen from entering the instrument. The CM-A183 is also recommended for flattening soft specimen. The diameter of the measuring area is 8 mm and the size of disk is 40 mm in diameter.

Item Order Code: A0E8-706

Dust Cover Set CM-A185

Plastic cover and glass protected 8mm target mask to measure dusty materials with prevention of contaminating the instrument.

Item Order Code: A0E8-708

Replacement Dust Cover CM-A186

Item Order Code: A0E8-709

CM-A96 Transmittance Specimen Holder (for use with CM-A514)

Required to fix opaque samples or the Glass or Disposal cells for measurement of opaque liquids in combination with the Sample Holder CM-A514. The clamp provides a constant pressure to the sample and the moveable side holders keep the cells in correct position.

Item Order Code: 1864-708

Sample Holder CM-A514

With the Sample Holder CM-A514 the instrument is set in horizontal position. Allows in combination with the Specimen Holder CM-A96 measurements of small samples up to a thickness of 22.5 mm or with the Glass- or Disposal Cells with 10 or 20 mm optical path the measurement of opaque liquids.

Item Order Code: B027152

Cell Holder CM-A515

For measurements of powders, paste and grains in combination with the Glass Cell CR-A504. The measuring head is set to up-side down position and the Cell Holder CM-A515 precisely fixes the position of the Glass Cell CR-504. To secure the instrument in a save position against tipping the Vertical Stand USD CM-A516 is recommended.

Item Order Code: B027153

Glass Cell CR-A504

Round cell made of optical glass (Diameter 34 mm) for measurements of powders, pastes, grains and small granular materials. For precise positioning, Cell Holder CM-A515 is recommended.

Item Order Code: 9970-2504

Vertical Stand USD CM-A516

Stand to align the instrument in up-side-down position. Ideal to be combined with Cell holder CM-A515.

Item Order Code: B027154

CM-A98 Rectangular Cell 50 x 38, optical path 10 mm

Rectangular cell made of optical glass for precise transmittance measurement of transparent liquids. The optical path is 10 mm and recommended for liquids with normal optical density.

Item Order Code: 1864-710

CM-A99 Rectangular Cell 50 x 38, optical path 20 mm

Rectangular cell made of optical glass for high precision transmittance measurement of transparent liquids. The optical path is 20 mm and recommended for liquids with low optical density.

Item Order Code: 1864-711

Flow-Cell with 10 mm path CM-A508

Flow cell with 10 mm path for reflectance measurements of water based opaque liquids in combination with Sample Holder CM-A514 and Specimen Holder CM-A96.

Item Order Code: 9970-237

CM-A131 Rectangular Disposal Cell 50 x 38, optical path 10 mm

Rectangular disposal cell made of PMMA with an optical path of 10 mm. Suitable for transmittance measurements of water based transparent liquids. Recommended for liquids with normal density.

Item Order Code: 1870-716

CM-A132 Rectangular Disposal Cell 50 x 38, optical path 20 mm

Rectangular disposal cell made of PMMA with an optical path of 20 mm. Suitable for transmittance measurements of water based transparent liquids. Recommended for liquids with low density.

Item Order Code: 1870-717

Hard Case CM-A176

For storing and hand carry the instrument and accessories.

Item Order Code: A0E8-604

Black Glass Tile CM-A511

Black glass tile with high gloss and absorption. Due to extreme long-term stability recommended as background standard.

Item Order Code: 9970-1109

CM-600d / CM-700d Catalogue

Portable spectrophotometer with small footprint for measurement of small and curved solid samples.

Download

SpectraMagic™ NX2 Colour Data Software

SpectraMagic™NX2 is Konica Minolta's digital colour data software, helping operators to measure, compare, store, analyse and communicate colour.

The software features a QC template system that helps control the measurement and reporting process, minimising the opportunity for operator errors.

Data is presented in an easily customisable template system to focus on usable and actionable data and reporting.

Learn More